Floater frame in black wood with silver front

✓ Made to order
✓ Easy and safe payment
✓ Shipping worldwide
✓ 100 days right of return

Floater wooden frame with a matte black lacquer on the sides, and a silver-coloured front which is only 10 mm narrow. The outer depth of the hover frame is 35mm and the inner depth is 23mm while the back is just under 40mm wide. Through the back, you screw the picture in place with one screw on each side.

Please note that it is your canvas that we will use the measurements on, so we will make a floater frame with 1 cm larger internal measurements, which gives you a frame with 5 mm space between the picture and the floater frame.

Assembly

A screw must be screwed through each corner and further into the image. The four screws will be enough unless the frame is larger than 100x100 cm. In that case, you can use a few more screws on the long side for increased stability.

You can actually hang the hover frame directly on a screw or nail, but you can also mount two brackets on the back of the hover frame, and tighten a string between the two brackets.

Cleaning

The hover frame is not delicate at all, but we would still recommend only dusting it with a dry cloth.